A set of useful tips that serve to show how to balance the blades on your Xieda 9958 micro copter. Samlynn79 shows the essential part of balancing the blades with some tape. This is useful when you want to make your microcopter more stable than the stock blades can achieve.
Find out how to engage your Scout CX’s “hyperdrive”. Earthling1984 calls this flying mode advanced. This flying mode will allow for much faster flying than is available with the default settings. Also see some cool flying around done by the author at the end.
This video shows one of the first real life flights performed by mantraguy. Notice the yellow landing gear that is used for easy spotting of heli’s flight direction. You’ll see small turns, elevation control as well as bringing the heli into hover from slight forward flight. These first steps are very important to establish a […]
In this video you will learn lots of useful tips about taking off and putting on of the rc heli wooden blade monocoat covering. Make sure you have hanger iron for loosening the regular aircraft covering. The hanger iron is also used for the stronger adhesion when you are covering your blades.
In this video cruddbucket assembles Mikado Logo 600 3D in a matter of 30 hours! Now that is what I call perseverance. The video captures about 21 hours of work. You can see for yourself the gaps in time, if you pay close attention to the white clock mounted on the left wall beside cruddbucket’s […]
This video details a step by step process on how to replace the tail shaft on your Blade 450 3D instructed by Mikel Graham. You’ll need a set of tools such as the small Phillips screw driver, 14 millimeter allen key and some sort of flat nosed pliers.