Transmitters

[comfiddler]

I have just purchased a new pocket zoom complete with electrics and 6 chanel receiver. Can anyone tell a newbie if any 6 chanel transmitter can be used with it?

[wan81sg]

hi
i just bought a zoom 400, i need setup help on the center servo(which help to change the blade pitch). isit need to place the control stick on the transmitter at the center position and then screw in the arm on the servo which is in 90 degree angle?

[Danimal]

Hi comfidler
Yes you can use a 6 channel TX as long as the TX and RX are compatible.

wan81sg
To set up your Heli for the first time the throttle should be all the way down and the servo arm at 90 degrees for normal flight then set your throttle and pitch curves. Only when in idleup mode should the throttle be at 50% and the servo at 90.