what are your Walkera 36 electronics

[nucla]

What kind of electronics are you guys using on you walkera 36 ans what size of battery do you use 7.4 11.1 14.4 and what would you change if you could



Thanks for the help

Nathan

BEC
ESC
Gyro
Servo

[dmb5656]

This is my first build with a similiar heli the 37. I have taken a ton of suggesstions from Baby Huey and Danimal. I am running the Walkera 0006 Gyro, a clone TREX 450 brushless engine and 30A esc. 11.1V 20C 2200Mah lipo batts, DX6 with the s75 servo's included and spektrum 6 channel receiver. Haven't flown it as of yet, still learing to fly and build but these were some affordable suggestions the experts here gave me! Good luck! Baby Huey pilots a 36 aslo I believe?

[Danimal]

Good question. It should be interesting to see what everyone is doing with there 36.

ESC : Castle Creations Phoenix 25
Motor : Just Go Fly 400 DH
Cyclic : HiTec HS 55
Tail : HiTec HS 56HB
Gyro : Walkera G006
RX : HiTec Electron 6
Lipo : Thunder Power 1320 and 2100

[BABY HUEY]

Hello,
Yes I'm running a 430l clone and 2200mah 18c 11.1v battery on my 36, 37, and my 68 and getting exceptional performance on all. My 36 has a HD610 Rx and HS55 servos on controls, A stock Walkera servo on pitch, and a Futaba 3110 on the tail. I am currently using a gyro from xmseller that looks like a Telebee and am not completely sold on it yet.
I am in the process of building up an alloy head for this heli as I have worn the stock one out and am looking forward to seeing the difference.

[Antman]

Hi guys, I'm running walkera stock TX and RX gyro, align 430L with dynam 30 amp esc, hs-55 servos with the walkera stock servo on the tail. I have 3d-x400 290mm blades and 11.1 1800 mah battery. I have not had a chance to upgrade the battery yet. I also have this little setup on my esc called glitch nomore seen on helifreak by Finless Bob. Here a couple of pictures of my bird.

Happy flying!!!!!!!!