![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Thunder Tiger Talk about your Raptor 30, 50, 60, 90 |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| OS 37 SZ-H in Raptor 30V2 G'day guys, i am just starting out in heli's but have been flying fixed wing for some time. I have decided to purchase a Raptor 30V2 to learn the basics. My question is, will an OS 37 SZ-H fit into this heli ok? the reason i ask is i can pick up a new one of these motors very cheap and would prefer to run an OS engine rather than the thunder tiger. Any help would be greatlt appreciated.... Cheers, Kris |
|
#2
| ||||
| ||||
| Re: OS 37 SZ-H in Raptor 30V2 Yes it does, The OS37 has the same fitting as the 32, This engine performs very well. You should notice a big difference if you ahve flown the 32. Good luck,
__________________ Regards Darren If you cant fly. dont quit trying. |
|
#3
| ||||
| ||||
| Re: OS 37 SZ-H in Raptor 30V2 I have been running the OS.37 for over a month and love it!! I great proven motor. Jay
__________________ _____________________________________________ BLADE CX, BLADE CP, RAPTOR 30 V2, FUTABA 9C |
|
#4
| ||||
| ||||
| I run a OS 37 in my Rappy 30 also. Didn't have much power running 15% nitro. Tried messing with needle settings but still wasn't happy with output. Started using 30% nitro and ran it a little on the rich side and the damn thing took off like a rocket! 30% all the way!!!!![]() |
|
#5
| ||||
| ||||
| Re: OS 37 SZ-H in Raptor 30V2 Yes nitro is good fun in a small engine, but if you upgrade to a 50 size then fit an os 50 hyper and run that on 20% heli mix you will be talking power. I run my 50 on this and its not quite as fast as my 90 but its a lot less hungry for fuel. i still fly the 90 all the time the sound is fantastic it gives me goose bumps on my arms when i fly it. what ever you fly have fun
__________________ Steve [color="Blue"]raptor 90 SE with a max-91 SZ-H ring C Spec for speed and power |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|