Shuttle ZTS pitch curve range

I don't seem to have the range of pitch to set the basic (hovering newbie style) curve. Using pitch on my radio I can only get from -2 to +6. I'm thinking something with linkages ? Any help would be extremely welcome - ta muchly

[diyman]

Hi,Im new at this game (3 months) but i have set up the pitch on my ZTS.
The full pitch range on mine can go from -5 to +9.
My radio,JR X-378 gives you five points on the pitch curve.
Have you set your radio(when looking at the pitch curve) to give you 0% at bottom stick(1) and 100% at full stick (5).This gives you full travel of the pitch to stick movement.

Are you getting full travel on the servo.Radio or link set up ?

Can you see full travel on your elevator.

Have you an instruction manual.
These are a few suggestions.Im sure some one else will put in some info.

be sure expo is off and dual rates are off
make sure your servos are centered and your control wheels and arms are 90degrees. then see how much travel you get