![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Setting Up Questions Post your questions and answers on setting up your heli for the first time. |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| Hi,can some one please help me to resolve this problem; my transmitter(futaba FF9)shows the wrong voltage value.I have repeatedly controled the correct value(10volt) of the battery,before placing it into the TX,few minutes after use,the TX alarm goes on and it shows about 2 volt lower than the real value. |
|
#2
| |||
| |||
| Re: FF9 transmitter display incorrect battery voltage Have you tried a different battery? |
|
#3
| |||
| |||
| Re: FF9 transmitter display incorrect battery voltage Hi Nells,I did try two different battries,unfortunatly ,both of them were(I suppose) wornout.I have had a chat with one dealer near my home town and he will send a new one,of what I understood,he is quite sure that the fault was in the batteries. Thanks for your reply. All the best, Mick. |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|