| |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Setting Up Questions Post your questions and answers on setting up your heli for the first time. |
| Our Sponsors |
| |
 |
| | Thread Tools |
|
#1
03-04-2008, 08:32 PM
| |||
| |||
| honey bee king 2 im a newbie hello, i am new to this forum, i started out with an axe cp, then i ordered a honey bee king 2 a couple days ago, can't wait to get it. so anyway, my experience with the axe was ok, the only problem was the tail wanting to wonder al the time, i mastered hovering with it. my question is on the king, will the stock gyro hold the tail still very well?? or would a head lock gyro be a lot better?? please help as i am a little green to gyros  |
|
#2
03-05-2008, 04:02 PM
| ||||
| ||||
| Re: honey bee king 2 im a newbie Hi, yes a head lock will hold better. Rate gyros, which the Honeybee comes with, don't compensate for wind which a head lock gyro will.
__________________ Regs, Emil "Do not worry Petrie - lots of things do not fly - rocks... sticks... Spike... "  |
|
#3
07-27-2008, 09:29 PM
| |||
| |||
 Re: honey bee king 2 im a newbie just wanted to take a moment and say hello. when you get a second read the string main motor burnt. I have owned a bee king II since the past christmas had about 20 minutes of good messing around before cooking the factory 370 motor. notice when you get it if the motor is a 370 with a blue heatsink installed. if it is make plans to order a 25 amp lipo speed controller and a 3600kv outrunner motor I believe or a 3400kv check for sure. sorry bad news but let you get a jump on it or realize you dodged a bullet. good luck mike
__________________ Oops that's gunna be expensive Sure honey new wardrobe that's fair humm ugh Exceed Falcon 40 E Sky Honey Bee King 2 Adding Soon Some Form of a Coaxial Heli E-Flight Blade CX2 |
|
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
| Thread Tools | |
|
|
