ok i just got my heli-max axe cp fixed from a recent accident ( i replaced to central hub and the swash plate assembly). So i put those pieces in, tightened every thing down, checked every thing, then i wen to my back yard to test it.
i plugged in the battery and i hear a small noise coming from a servo. I ignored it and stepped back to test it. I slowly eased on the throttle, i finally got to full power and i still did not get lift off
. so i thought to try the other controls with it at 1/4 power.
The tail rotor worked fine. Then i tried to lean it to the left. It suddenly lifted off the ground. So in a panic i killed the throttle and landed safely. Puzzled, i brought it to around 1/8 power and tried to lean it to the right this time. As soon as i did that it started to bend the trainers, as if i was giving it - throttle.
so i then decided the look at it with now power then i tried leaning it to the left, the fat part of the main rotors started to point up slightly. then I tried to the left. It made the fat parts face down drastically. so i disconnected the motor to see if the rotor blades would turn like normal. They did turn up, but only very slightly. The only thing i can think of is if one of the servos are messed up. can any one help me ??
NOTE: i split it up kind of randomly so it didn't seem so over whelming, because i tend to make a story out of everything
12-28-2007, 05:02 PM
wth. help! 
i will do that.
). and it works now
