Walkera E22 Pitch/Throttle Set up

[Cobra60]

Hi. I have just been given an E22 previously crashed, with blade/head damage. After replacing numerous bits, it will not leave the ground.
Presume pitch setting/DIP switches.
Please could someone inform me how to set up the blade pitch and correct DIP switch positions. Also with increasing throttle should swashplate rise as mine lowers. Have tried reversing throttle dip switch with no joy!

[dasbeermeister]

Tha swash should rise as the throttle is pushed up.

[hawkman]

If the swashplate is the mechanical setup you need to reverse channel 6.

Rob

[dasbeermeister]

Dip settings should be;
1-off
2-on
3-off
4-on
5-on
6-off
7-off
8-off
9-on
10-off

the 7 and 8 settings are not how they were set at the factory but I've had better luck with the dips like this.

[Cobra60]

Many thanks Dasbeermeister. I will give it a go.

[Cobra60]

Apologies hawkman. Thanks also. The head is plastic and quite loose. Does not seem to be that secure although all linkages are ok. Still will not take off even with max gas.

[staafken]

have you checked the lipo , i crash-destroyed one yesterday