| |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Setting Up Questions Post your questions and answers on setting up your heli for the first time. |
| Our Sponsors |
| |
 |
| | Thread Tools |
|
#1
07-09-2007, 09:59 AM
| |||
| |||
 Tower pro 9g Servos cables too short 36# Well, The servo cables are half the size of the original walkeras. So back in with the old servo's. Apart from the tail! Is there an extension of some kind I can use? Mickey Edit: Would a local hobby store carry extentions in stock? or would Maplins be the place to go? I'm based in the UK. Anyone else had this? Limo Last edited by Limo2005 : 07-17-2007 at 08:55 AM. Reason: EDIT/UPDATE  |
|
#2
08-02-2007, 09:32 PM
| |||
| |||
| Re: Tower pro 9g Servos cables too short 36# Hello yes you can get extension leads they are abot £2 from model shops but I have just bought 10 for £4 deliverd from ebay so I would try there first. yes you are right about the tower pro servos the leads are shorter than most other servos. hope this helps |
|
#3
08-16-2007, 05:52 PM
| |||
| |||
| Re: Tower pro 9g Servos cables too short 36# With some repositioning of the servo leads around the motor, I was able to get them all to fit nicely! I'll upload a pic in due course, However, I'm still not able to fly due to tail wagging! Best Wishes Mickey |
|
#4
08-16-2007, 08:25 PM
| ||||
| ||||
| Re: Tower pro 9g Servos cables too short 36# Hi Mickey, Which gyro do you have? Some of the walkera gyros have to have the sensitivity turned way down to keep them from wagging the tail. I have a G001 that even turned all of the way down is still too sensitive. Hope this helps, Neil
__________________ We have nothing to fear but fear it's self! And the hard, hard reality of subterranean flight! Walkera 36- 430L,30amp esc, Futaba 6ch Walkera 36- basket case-Comet 500, Kalt Baron Whisper, Caliber 30 GMP/ HIROBO COBRA 50 FLYING!! |
|
#6
08-17-2007, 07:56 AM
| ||||
| ||||
| Re: Tower pro 9g Servos cables too short 36# Me also, I am using a G006 and it works very well in mormal mode. I have not sorted out AVCS mode yet and probably won't because I've purchased a heading hold gyro and just have not gotten to installing it yet. That will probably be one of my next posts to get help setting it up! LOL Good flying, Neil
__________________ We have nothing to fear but fear it's self! And the hard, hard reality of subterranean flight! Walkera 36- 430L,30amp esc, Futaba 6ch Walkera 36- basket case-Comet 500, Kalt Baron Whisper, Caliber 30 GMP/ HIROBO COBRA 50 FLYING!! |
|
#7
08-17-2007, 10:38 AM
| |||
| |||
 Re: Tower pro 9g Servos cables too short 36# Quote:
Mickey |
|
#8
08-17-2007, 01:39 PM
| ||||
| ||||
| Re: Tower pro 9g Servos cables too short 36# That's my problem too! Once I get these things to fly straight I'am too scared to take chances! Getting better though. Neil PS Check out my post in LIFT OFF
__________________ We have nothing to fear but fear it's self! And the hard, hard reality of subterranean flight! Walkera 36- 430L,30amp esc, Futaba 6ch Walkera 36- basket case-Comet 500, Kalt Baron Whisper, Caliber 30 GMP/ HIROBO COBRA 50 FLYING!! |
|
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
