![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Setting Up Questions Post your questions and answers on setting up your heli for the first time. |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| nexus30- swash hi guys & gals, have had lots of probs setting up my nexus 30, or maybe I can't drive it. but what is the swash plate setting - normal, 120degrees or 180 - i suspect 120 but have it set on my hitec 7 at normal. regards' erndog ![]() |
|
#2
| ||||
| ||||
| Swash plate. Hi, Firstly the swash plate on the nexus is not capable of giveing 120deg. The nexus swash plate is a standard 90 degree swash plate. any other setting will have the wrong affect. I notic that you say it is set to normal, This should be 90 degree it should confirm this in your radio instructions. The nexus does require some work to get it set just right but when it is, it will fly very well. Hope this helps, Regards, Daz Last edited by Daz(DJLFlapper) : 06-26-2004 at 08:50 PM. |
|
#3
| |||
| |||
| thanks 4 the reply - u have confirmed my suspicions, i have not been able to find this info elewhere. great site eh? regards godnre- I will get this thing going yet! ![]() |
|
#4
| ||||
| ||||
| Nexus I have had many good flights with my nexus. I took a lot of stick from the guys that could afford better, But it feels good to see them eat there words. The nexus is perfectly capable when set up right, though you may have to learn more about the setting up than you may with other heli's. Don't rush and you will get there, Regards again, Daz |
|
#5
| |||
| |||
| Hi Daz, thanks for that - it gives me confidence that i will get there eventually. will keep u & all others of my progress - this may take some time as i only have Sundays free & weather permitting etc. also, i may need to pick your brain at some time - but won't pester u with rubbish. again thanks, godnre ![]() |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|