![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Setting Up Questions Post your questions and answers on setting up your heli for the first time. |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| Hey guys I just got a new Nexus 30 with OS32 SX and Im using 15%nitro 20% oil by Power Master. Checked everything but still wont work.. you guys got any tips?thanks |
|
#2
| |||
| |||
| Is the engine getting Flooded ? When the engine gets flooded the glow Plug will get socked also an this will keep the engine from starting. You will need to change the plug or you can dry the one off. I take the plug out and put it on the starter to burn the excess fuel off. just be carful not to burn your fingers |
|
#3
| |||
| |||
| been doing that...still no luck ![]() |
|
#4
| |||
| |||
| What do you have your main needle set at and what glo plug are you using? |
|
#5
| |||
| |||
| Main needle Try screwing your main mixture needle all the way in the turn it about 1 1/2 too 1 3/4 out and see what hannpends. If you have to turn it more than say about 2-2 1/4 out then there must be a fuel supply problem. e.g (1) Blocked fuel hoses (2) little cuts or holes in the fuel lines (3) the fuel tubing inside the tank has fallig off. i hope that helps Jesse ![]() |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|