6.2v Voltage Regulator w/ 4.8v Gyro Output

[perfectregulato]

Our new 6.2v Voltage Regulator is going to be a top runner for Voltage Regulator needs. This unit will allow upwards of over 11.1v input from an array of battery technologies, (Ni-Cd, Ni-Mh, Li-Ion and Li-Po). Output Voltage is a constant 6.2v @ 10A with a Maximum Amp draw of 16A. Use in conjuction with your own power switch, or simply plug your Battery directly in.

The Unique design of the Heatsink with ULTRA-THIN Fins allows for super fast dissipation of heat and makes Installation a breeze due to not needing air-flow over the Heatsink. Our Regulators wires protrude from both sides, which also allow for an easy installation. If you would prefer to have all wires enter / exit from the same side of the unit, simply add the "Add Single Side Wires" upgrade to your cart.

Also built into the same unit is a 4.8v relay for use with Gyro / Tail Servos that are suggested to use an input of 4.8v - 5.1v.

This compact and light-weight Voltage Regulator will definatley exceed your expectations!!!

Standard - comes with standard 6" leads (universal).
Add 2 x Rx Outputs - same as standard with 2 rx output leads.
Add 16AWG Deans - same as standard with 6" 16awg deans battery input.
Add Both - same as standard with 2 rx outputs and 6" 16awg deans battery input.
Add Single Side Wires - upgrades order to have all wires enter/exit unit.



Technical Information

--------------------------------------------------------------------------------


Min. Input Voltage: 7.4v
Suggested Input Voltage: 7.4v - 11.1v*
Main Output Voltage: Constant 6.2v @ 10A
Gyro/Tail Output Voltage: Constant 4.8v @ 1.5A
Max. Main Amp Rating: 16A
Max. Gyro/Tail Amp Rating: 3A
Heatsink Material: Aluminum
Length of Lead Plugs: 6" Each
Plug Type: Universal
Size: 60mm x 30mm x 9mm
Weight: 31.7g

* for nominal performance, use a 7.4v input voltage

visit us online at http://www.perfectregulator.info