| |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| RC Helicopter Batteries Discuss about your battery issues. Charging, Discharging, memory.... |
| Our Sponsors |
| |
 |
| | Thread Tools |
|
#1
07-24-2008, 09:54 PM
| ||||
| ||||
| lipo battery question i recently bought a belt cp and the battery will not complete its charge. or at least the charger is saying that it is not finishing. any suggestions as to why this could be?  |
|
#2
07-25-2008, 07:25 PM
| ||||
| ||||
| Re: lipo battery question you are talking about Li-poly. have you checked the voltage after you have charged it. check cell voltage after the first charge. Example 1-Cell: 4.2V (4.15 to 4.22) 2-Cell: 8.4V (8.32 to 8.44) 3-Cell: 12.6V (12.48 to 12.66) 4-Cell: 16.8V (16.64 to 16.88) 5-Cell: 18.5V (18.30 to 18.60) you can read about li-poly warnings post # 14 might be worth a look http://www.helifever.com/forums/rc-h...t-using-li-po/
__________________ *Trex 450XL 3550kv motor and 25A esc, electron6 RX, 240 gyro |
|
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
