esky 6ch transmitter

[gchpa]

In the back under the batteries there are 2 switches and 1 on the left corner.
Does anyone know what these are for.

[gchpa]

I guess nobody knows,I don't know I tried to find out.Thanks

[Jimbio]

The switch on the right is to temporarily switch to a second box if you plug into another transmitter, (for training). On the left top is a gyro switch and I believe its to disable it. This is on the back of the heli and it is used to keep the tail straight. The left switch is the idle up, when it is off the heli baldes will normally go from 0 to 10 deg for upward lift. When you turn it on you will have -10 to 10 deg. your throttle should be centered at min to turn this on or the heli will come to earth very quickly.

[gchpa]

Nobody is understanding me I understand what those are for. If you take off the cover for the batteries and take the batteries out. [U][b]Then you look in the holes under the batteries there is a red little square with two switches in there I understand what the ones you are talking about are.[/B][/u] There is also another one under there in the lower corner that is like a Grey little square with one switch there.I know what the trainer switch is the idle up the hov pit. If you take the batteries out and look under them in little hole there are 2 switches like in the middle and 1 lower left hand corner also. Thanks for trying to understand though.

[vlaporte]

Sir,
I saw the two little white switches (called DIP switches in computer talk) inside the transmitter behind the third battery. I wonder if they are used to change the transmitter to mode 1 (we use mode 2 in USA - throttle on left stick). You cah download a very detailed manual for your Esky heli and for the Esky transmitter from this web site-
http://www.twf-sz.com/english/index.asp
Luck,
Vince