Walkera 36 + Futaba 7C + Eflite G90 Help!

[HeliGunner]

Hi Everyone,

Im new here and seeking some assistance please. I got my hands on a Walkera 36 and rebuilt it from here now.

I have installed the following:

R127DF Futaba 7C receiver
7C Futaba Transmitter
Eflite G90 Gyro

Now here is my dilema setup all the necessary gains for the Gyro but the tail still turns to the left (right nose).

I get no lift very small, adjusted the pitch already

I'm running the 400SD stock motor and an esky 11.1v 1000map lipo.

Any sudgestions please would help

Thanks
HeliGunner

[BABY HUEY]

HI Gunner,
I hate to tell you this but you will never get far off the ground with that motor. You have made a great start with that radio but I have only gotten one 36 off the ground with the stock motor and it would only hover for maybe a minute or so.
To really make it fly you need to get a brushless motor and stay away from the Walkera ones as they last about as long as fireworks when lit!
Also you may have a problem with the tail drive slipping but it is difficult to tell for sure with out a good power unit as you have to balance head speed with tail speed on a belt drive Heli.
Hope that helps.
Huey