DX7 RADIO HELP! Suggestions!

[darticus]

Anyone know some helpful hints on using this with a CP Pro heli? I can hover with it but seems to make the heli like a jet....Too fast very sensitive. Hard to control. Maybe its just a new radio I have to learn to use.

[diverjack]

Yup........trust me........it's not you........it's the radio! Enjoy!

[hawkman]

Try this:

on the servo arms...make sure the links/rods are fitted to the innermost holes....this will reduce the travel/throw of the servo travel.


You might be able to fit a bit of weight to the flybar...this will make things a bit more stable.

Small helis are difficult to fly...patience and time.

There should be an 'expo' function on your radio? dial in 20 percent for a start...this will make the control function a bit softer around the center travel of the radio controls....the more you push the stick the more responsive the control gets.

Be very careful making adjustments...keep your training gear on and dont be tempted to fly in small rooms! you will increase the chances of wrecking the heli.

Rob

[FerDucloux]

hi guys,
i recently bought a dx7 transmitter, and i'm finding impossible to bind it to the AR7000..
i saw a video on youtube,, when the guy switchs on the radio with the bind pressing the bind button, the button keeps flashing green.. and in my radio when i press the button and switch it on. it just flashes one time green make some very short beep and that's it... and the ar7000 keeps blinking amber..

i think there's something wrong with the TX... any idea/suggestions?

much appreciated
Thanks

[coptercptn]

Make sure all the switches /controls on the TX are set according to the instructions...you may be in set-up mode on the TX and therefore the receiver won't bind...
Go slow and check step by step...I had this problem once and of course it proved to be "pilot error!"