Can someone explain what this does

[heavymetal92]

Hi all,

Can someone explain what all this does and what can I add or take off to make it a better setup. I have in my Hummingbird V3 a Century Elite 5 in1 flight control unit 0.72 mhz receiver, gyro, mixer board, main and tail speed control. It also has 2 setting screws one labeled gain and the other mix what exactly do these do? My instruction manual lacks an explanation on what the functions on it are for such as in what situations would I need to change the gain or mix



thanks in advance


JD

[darkside212]

the mix changes the amount of "rudder input" as you change throttle input. It is similar to revo mixing

gain is more like a "sensitivity" setting. The higher the gain the more sensitive the gyro is. Do not think more is better as too much sensitivity (or gain) will cause tail wagging. Adjust the gain until you hit the point of wagging and then back it off a little

hope that helps