![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| R/C Helicopter Radio and Gear Talk about Futaba, Airtronics, JR , Hitec, servos, gyros, receivers and... |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| Radio setup for raptor 30v2 Hi guys is anyone able to help me with a radio set up for an absolute begginer (Me)on a JR X-378 system to fly a Raptor 30v2 cause there arent many people around here that fly helis And i need some help Greatly appreciated if any one can help ![]() |
|
#2
| |||
| |||
| setup ask and I'll try to answer your question. its kinda hard to write a book for general setup here. |
|
#3
| |||
| |||
| Hi I fly a Raptor V2 with a JR 378 PCM - once you have set up the heli on the bench you will need to set up the radio. This is quite hard and you may need to ask more questions but basically select module one. select heli and PPM or PCM depending on your reciever type. Once you have selected the heli modes you can go through the set up one at a time. The main set would be the Pitch curve and gyro settings. All the settings should be placed in as per the Raptor instructions at first. You casn fine tune at the field - but for Hovering these settings are fine. If you have any specific questions - I could help for this radio... Great life great flying - good chioce of heli and radio... |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|