Futaba 6XH

[thenoobs]

does anyone know how to setup 6XH radio for reflex?
I cant figure it out to use this radio for 3D.
I can set it to work without 3D support though. (when I put throttle to minimum, the engine stop)

[mabur]

Hai..
I have JR radio and very beginner in rc heli, and my experience with your problem is the throtle travel setting. must be not 0% at the lowest position or your throtle hold setting.



s'lam k'nal..

[bigdog714]

if you flying a fueled motor you cant set the low throttle to zero , or it will stall , find out the recomended idle rpms for the motor , and the max rpm , devide the idle rpm by the max rpms , that will give you the percentage for low idle , for example , 3000rpm max with a 400rpm idle,

400 / 3000 = 0.1333 or 13%

13% would be your low throttle percentage