Trying To Hoover

[Pipes]

I havea Dragonfly36- When I push the stick on the Left hand side of the radio forward the Main Rotors blades move faster as I give it more Throttle the when I just get over halfway center throttle as I give it more throttle just about to get it off the ground the blades turn slower and the full throttle almost stops the rotating of the main baldes. I don't know why. I'm trying to fig out but doesn't make any sense to me. Can someone help me out I have been at this trying to Hoover for a while now.Are my Dipo setting set proper on the back of the radio or my switches on the Front of the Radio in wrong Place. I have the top righthand switch on Normal post
Thanks again

[chaos]

I found a manual here and it says the throttle is not adjustable. I'm guessing something is wrong with the motor controller, which is part of the receiver box. I'd send it back. Sorry.

[Aztek1701]

Hi Brian,

Yip I agree with Chaos here, sounds like the speed controller is broken. Its unlikely to be the battery since that would keep trying at a constant low speed.

If the heli is new, take it back and if its not, you need to see about a replacement 4 in 1 box which is probably the most expensive item on the heli.

Take care... Azzy