![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Getting Started in R/C Helicopters For beginners who are just starting off. Questions? Answers? Get them here. |
| Our Sponsors |
|
![]() |
| | Thread Tools |
|
#9
| |||
| |||
| Re: What do I need to get started? is it a Century Hawk??? I have one...they are great little helis..tough and easy to fix....and easy to fly too. Sims? if your PC is not very powerful then try TruFlite 3D...I have this and its good.....if your PC is nice and powerful then Reflex XTR sounds to be very good. Getting a sim is a wise move....it will reduce your learning time and save money too....helis are difficult to fly at first...but with practice you will wonder what the fuss is about....its an awsome hobby:-) Good luck Rob |
|
#10
| ||||
| ||||
| Re: What do I need to get started? I have to agree with hawkman, Though these days all the sims that are available are good. I use the Reflex XTR, it is solid and has great flight physics. That is to say that the way the heli's and aircraft fly in the sim enviroment is as close to real as you need to be without being at the feild. There is one thing that is very important though when you want to go into the sim world. This is your PC, Make sure that your PC at least meats the minimum requirments. If that is no problem then you will get a great time out of your simulator. The hoverfly is actually cheeper than any simulator that is worth having. and is going to give you the fun of flying for real though. A lot of the students that I have actually prefer there lessons on the hoverfly because they can actually see themselves flying for real. It does help there enthusiasum for the hobby. Simulators I would recommend. Reflex XTR, Realflight G3. Easyfly Pro, Trueflight, Easyfly/Piccofly, Their are lots to go and view. If you go to most good model shops they have one set up so that you may try one before you buy. Hope this helps.
__________________ Regards Darren If you cant fly. dont quit trying. |
|
#11
| |||
| |||
| Re: What do I need to get started? I used Easyfly and FMS for my first sims....they gave a good insight to heli flying and certainly boosted my learning experience....I had many frustrating hours getting the hang of forward flight....but they were hours that were fun and very rewarding. The biggest problem with these two simulators was the lack of idle up and throttle hold facilities....they were already set up in Idle up 2 mode....so you can go ahead and do inverted flight etc; once you get good enough....I certainly didnt rush into that upon flying my first ever real model heli;-) They are 'cheap n cheerful' sims which are a good introduction....but as I said, the lack of those all important 'functions' is what lets them down. I ended up buying TruFlite 3D...not the best sim but my computer is a feeble machine compared to those required for say...G3 or Reflex...I would love Reflex. Sims have an important place for established flyers, I regularly use TruFlite to keep up with practice...plus being able to do autos without wrecking the real thing is a bonus.....or at least you can condition your reflexes accordingly...rather than watching your real model plummet to disaster...becuase the engine has died out. I like trying inverted autos, fighting those 'natural' instincts so the blades dont slow etc...then flipping the heli over....and conserving energy so you can land the thing...is an interesting experience.....and its a skill that could save your machine should you get caught out in real life. The Snel flite looks a good heli.....I would have gone that route as well....but cash was short and I was saving to get a nitro heli.....I can see your point about beginners wanting to fly straight away...I did....but had to wait. All in all....its flight time that is crucial....whether its on a simulator or using a heli like the Hoverfly....if either can generate a keen interest in RC helis...ie going on to larger machines be they electric or nitro (or turbines or gassers.....hmmmmmmm....gassers...I want one). This is a great hobby, I like seeing people being encouraged into it. Rob |
|
#12
| |||
| |||
| Re: What do I need to get started? Quote:
HI...Q....I have just bought a trex450se...with a futaba 7 tx from rc-expert. I have only had 2 months flying experience with a e-sky 4ch heli...which I found ok to fly...Now opening the box of a fully assembled RTF t-rex with a complex Futaba 7 tx...all of this looks scarey....I don't even know where to start.....can you advise me?? |
|
#13
| |||
| |||
| Re: What do I need to get started? A new book is available "R/C Helicopters: A Guide For Beginners" from Traplet Publications covering everything the beginner needs to know, including choosing/building the right model, installing the components of the radio, electric power as well as internal combustion engines as well as learning to fly safely. https://sslrelay.com/s84068217.onean...B%3D28MHB%3D29 |
|
#14
| ||||
| ||||
| Re: What do I need to get started? Can you buy a hoverfly in the us? My dad really wants to fly but he just isnt patient enough to use a sim. He told me the other day that he was capable of hovering so he tried my blade cp pro and shortly after taking off he lost controll and handed me the controller and thankfully i recovered it. He convinced me that if i let him fly again i could always take over just like before and save it, so i let him. Anyway he didnt hand me the controll until he was 5 feet from the ground and i broke my tail boom. I think one of those hoverflys would be perfect but i notice that on that site you linked theres no info on pricing delivery etc. Any suggestions on getting one? |
![]() |
| Our Sponsors |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|