gyro question

[HEATHEN76]

yesterday everything was great today when i plug my batteries into my belt cp the gyro chirps 3 times ( like its suppost to) then solid red for a sec or 2 then it starts blinking. why would it start dlinking the book that come with it is crap all it says is that it should turn solid red when ready for flight. this really sucks!! please help me

[chaos]

I donno about that heli, but maybe check the rudder trim. Maybe it should be centered when you turn the thing on.

[hawkman]

Could be the gain, make sure its turned off. There might be a switch for this...the Gyro likes to be in Heading Hold mode when first powered up.

I dont know the radio you have but find the switch and make sure the remote gain is off.

Rudder trim? this shouldnt bother the gyro as such...the only time you would adjust this is by hovering and seeing which way the tail goes...if its still then all is well....if there is movement you would land and adust the linkage a tad....go hover and repeat the procedure till its good.

Rob

[badastinner]

Make sure throttle is all the way down, also make sure throttle trim is all the way down. i had this problem with my honeybee. It may be a safety cut off or something.