Problem disconnecting battery from charger

[Molotov Tommy]

Hi, I just recieved the esky belt cp helicopter in the mail. After I connected the esky charger to the battery (and charging was complete) I could not disconnect the charger from the battery. The charger contains the female connection end with 4 metal pins in a plastic housing and the male end is connected to the battery through wires. I tried simply pulling the male end out of the female port, but that was ineffective. Is anyone familiar with the esky setup able to tell me how to disconnect the battery. It seems like it should be simple, but I'm wondering if I need to use some pliers or something more dexterous than my fingers. Thanks.

[park]

Pull harder! Yeah they are pretty tight when new. I use pliers for about the first 10 times or so.

[Molotov Tommy]

Thanks I'll try that.

[Dilbeck]

My girlfriends blade 400 has the same problem, (to tight) Carefull though you could pull the wires plumb out of the connector!

[hawkman]

Hi Dilbeck...your Lady has a Heli? thats cool

My Lady told me I was getting obsessed with this hobby...she wont join me though

Rob

[Dilbeck]

Yes just got the blade 400 she has been playing with the sim for some time now but wont fly mine, She has been flying the cx2 for a month or 2 so got her the 400 because its a all in one kit with the dx6, Right out of the box was in pritty good shape but needed a little adjusting and she was able to hover no problem.