![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| General Maintence & Repairs General Maintence & Repairs discussion |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| Total loss? I crashed into pool heli now dry both motors full blast no response from controller is it total loss or maybe need new reciever? Like I said new to rc hobbies. Has enyone done this before or just me the Stuid newbie. |
|
#2
| ||||
| ||||
| Re: Total loss? You probably killed your RX. The motors need relubricating or the bearings will die also. The servos will have the same problems as they have motors in them also.
__________________ We have nothing to fear but fear it's self! And the hard, hard reality of subterranean flight! Walkera 36- 430L,30amp esc, Futaba 6ch Walkera 36- basket case-Comet 500, Kalt Baron Whisper, Caliber 30 GMP/ HIROBO COBRA 50 FLYING!! |
|
#3
| |||
| |||
| Re: Total loss? New to this what is the RX and what should I use to lubricate the motors and bearings. |
|
#4
| ||||
| ||||
| Re: Total loss? The RX is the receiver the TX is the transmitter. The best thing to use on your motors is a light machine oil like 3in1. I hope this helps as you have a tough problem there for anyone not just a newbee. I wish you good luck and don't give up as this is a great hobby. Feel free to ask anything you need to know as there is a bunch of great guys on here. Huey
__________________ We have nothing to fear but fear it's self! And the hard, hard reality of subterranean flight! Walkera 36- 430L,30amp esc, Futaba 6ch Walkera 36- basket case-Comet 500, Kalt Baron Whisper, Caliber 30 GMP/ HIROBO COBRA 50 FLYING!! |
|
#5
| |||
| |||
| Re: Total loss? I did just as bad maybe worse I hit the invert button and broke main gear didn't know it and took it off the gear slipped it leened forward hit a pallet jack at work it was brand new less than 30 seconds and now it vibrates like it's going to fall apart |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|