![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Gas Power RC Helicopters Like the smoke and the smell? |
| Our Sponsors |
|
![]() |
| | Thread Tools |
|
#17
| |||
| |||
| Re: landing help How about a high speed decent from 30 feet at full throttle? The Raven was at a very slow level flight when it went down. I applied full throttle to get it back and it slammed the ground with everything it had. What happened was the long ball arm on the swash plate disappeared taking with it the pushrod to the blade. Raven is a wright off. Ordered a Heli-Max Kinetic 50. And yes I check all critcial linkages! Totally bazzar. Jim |
|
#18
| ||||
| ||||
| Re: landing help i did not realise that the black plastic part of the ball link, the hole is bigger one side than the other, so if you put them on the wrong way they will seem very tight then when have been flying for a while the smaller size will be the same as the larger side and they become very oversize. this could lead to it just poping off when you dont want it to. just a thought i have checked all mine and all those i was not sure about i have replaced. ![]()
__________________ Steve [color="Blue"]raptor 90 SE with a max-91 SZ-H ring C Spec for speed and power |
![]() |
| Our Sponsors |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|