e-flite blade cp

[thecheat]

well I actually have a 36 (trex clone) so I use those. but you could probably still get them, clip them/shorten them to the right legnth (make sure they're a couple mm longer than your stock ones) and them balance them. once thats done you should see that the hole is a bit big and loose. this is on purpose so when they hit, since they don't end and break as easly they can move a bit and not break your heli. I think the blade slots for the blades are the same size as all micro- med micro heli's so they should work. i'm not positive,but if you can't get the head to tighten on right then it's time for some creative enginering


PS: if you want to try look at grand rc for the blades. you can get a pair for only 10 bucks and shipping for me was only 4.00 for 2 pair blades plus a set of tail rotor ones. shipping time was only 3 days too (if you order before 7 it's would only be 2 days) as their stock is located in the US.

Originally Posted by JimmyT

For sure man! Also, the FMS software that came with the cable I bought is a free download.

Grab it here

So basically, I paid $40CDN for the cable. An excellent price considering that once it saves me two sets of rotor-blades (and it likely already has), it's paid for itself.

Where did you get that cable?

Originally Posted by Dwight.Dwart

Where did you get that cable?

I scooped it up at the local hobby shop, the documentation says it's an "Interface for Elite 4 Radio #CN2001SM1".