| |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| E-flite Talk about the Blade CP & CX... |
| Our Sponsors |
| |
 |
| | Thread Tools |
|
#1
07-15-2008, 03:39 PM
| |||
| |||
| Hey New Blade Owner Here! hey all i just got a new blade CX2 and love it...but it seems to have problems.. no matter how far i push the alerion trim over it still drifts to the left..... it seems very edgy and i cant keep it in the air for more than 5 seconds without crashing it..... it just wont hover without drifting all over the place  |
|
#2
07-16-2008, 09:13 AM
| ||||
| ||||
| Re: Hey New Blade Owner Here! The 3n1 (or 4n1) control unit on the copter has 2 pot adjustments. One for gain and one for proportional. The Proportional pot is the adjustment for the motors. Center your trims. With the heli battery unplugged, turn the pot adjustment clockwise. Use tiny turns. Turn pot so it barely moves. Plug battery in and test copter. Keep adjusting until either the nose doesn't drift or until a clockwise adjustment goes right, then counter-clockwise goes left. The trim will work better after that. If you download the manual, it covers that specific problem. http://www.e-fliterc.com/ProdInfo/Fi...CX2_Manual.pdf |
|
#3
09-06-2008, 12:56 AM
| |||
| |||
| Re: Hey New Blade Owner Here! Take it easy. easy dose it. |
|
#4
09-07-2008, 02:22 PM
| ||||
| ||||
| Re: Hey New Blade Owner Here! Love my CX2 with fitted SH-60 SEAHAWK (UH-60 BLACKHAWK) body.
__________________ T-rex450seV2. Align 430XL 37000KV (12T), Align ESC BL35X, FP-EVOLITE 3S 11.1v 2100mAh/18C, Futaba 401 gyro/9650, 3x Hitec HS65HB, Spektrum DX7/AR7000. Blade CX2 |
|
#5
10-14-2008, 09:30 AM
| |||
| |||
| Re: Hey New Blade Owner Here! Anything you say. |
|
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
