Lower Rotor Head Placement

[patrick51]

I had to do a complete disassembly, and can't understand the exact location of the LRH on the outer shaft. Does it just float up and down above the swashplate. There are 2 pieces to the LRH and holes for screws, do both pieces attach to the Outer shaft? does something attatch to the Outer shaft at the holes? A Pic might help thanks

[FlynHawn]

I'm a newbie from Hawaii and I just replaced my LRH on my CX2. You ned to slide the lower half on first, then slide the upper section on next. Align the upper section hole with the hole on the shaft, then install the allen screws. Do one at a time setting the first one in but do not tighten yet. Install the second one next making sure that both screws set up in their respective hole. Now tighten up both screws. Next, slide the lower section up into the upper section and snugly install both allen screws. You must "sight" down the rotor shaft from the top to make sure that the blade mount and the pins form a perfect "t" or "+".They must be perpendicular! Now you can tighten up the last two screws.