![]() |
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| E-flite Talk about the Blade CP & CX... |
| Our Sponsors |
| |
![]() |
| | Thread Tools |
|
#1
| |||
| |||
| Blade CX 2 Extreme I would like to know if anyone flys this outside. I heard you can with little wind. Also I have seen people advancing the servos by one hole . How does this effect the heli? Can someone show pictures of how this is done. If you do this then does it want to make the Heli move forward and then you have to make other adjustments some where on the Radio etc. Thanks ![]() |
|
#2
| |||
| |||
| Re: Blade CX 2 Extreme Automessage: Sorry you can't post a link because you have a low post count, I will consider this as spam. Please contact a Moderator/Administrator if you would like to post a useful link. |
|
#3
| ||||
| ||||
| Re: Blade CX 2 Extreme well i went 2 holes and let me say. it is very very sensative to any input. you will need to adjust the amount of input you do. it does make it a lot better to fly in the long run. you also will slap your blades more. as far as going out side. no wind is better with the cx2. very hard to fly in the wind. |
|
#4
| ||||
| ||||
| Re: Blade CX 2 Extreme have to agree with jeremy on the wind. the heli will hold up to a small amount of wind but you won't be able to make it do anything but fight the wind. where's the fun in that? my cx2 seems to lunge forward with a forward command but it wont hold the stance. it darts out say 20 - 50 feet then like a leaf from a tree branch the weight takes over and the nose flies up. the heli nearly stops and the leans forward again. what is that?! is this normal? |
|
#5
| |||
| |||
| Re: Blade CX 2 Extreme Thanks for your Input. |
|
#6
| |||
| |||
| Re: Blade CX 2 Extreme Think it is normal, someone called it willow leafing. Mine does the same although you can let it settle out and go forward again, unless against the wind. |
![]() |
| Our Sponsors |
| |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|