cx2 drifts left

[cbr_jon]

it goes forward and left i have never had a problem no bad wrecks or anything. i tried messing with the trim and proportianal thing i cant get anything to work any suggestions

[Daz(DJLFlapper)]

Hi,

As there is nothing to realy adjust on this model I would assume that it is a problem of the C of G being out. If the Heli is travelling forward and left, Maybe adding a little bit of wieght to the rear right might ballance it out. this may halt the drift that you are getting.

Sorry but that is all I can think of as I don't have any experience with this heli.

[hawkman]

Try adjusting the flybar linkage a little bit....adjust half a turn in or out and see if this improves things.....if the flybar linkage is too long or too short the 'phasing' will be slightly out which will cause the heli to wander about....usually in the same direction.

The 'phasing' is all about gyroscopic precession....if the flybar is not running true...well it will actually but the rotor 'disc' will be out of kilter....which will move the heli the opposite way.....so try some adjusting....if doing the adjustment one way makes it worse then adjust the other way till the heli hovers nicely.

Hope this helps.

Rob

[cbr_jon]

fixxed it the two connectors for the servos on the swash plate were uneven