E-Flite Training Gear

Thought i'd make a new thread instead of burying in my other thread, here is my question:

Does anyone have a manual, or picture diagram on how to hook the training gear that you can buy and attach to the Blade (in this case I have the Blade CP).

By saying 'training gear', I am referring to the 4 metal rods with an orange 'ball' at the end...

Thanks in advance.
-Mike

Ok so I became unlazy...

http://www.deeteeenterprises.com/NS.HumBrd.CNE053.php

This helps a little, I will continue to look, in case anyone else has this problem.

Thanks
-Mike

[Old man]

If you use them be carefull with the small tubing that holds the balls in place they come off very easy i loose them on my first fly and could not get replacements so i used some electric wire slaving.

Or use small gas line, works perfect.

[BLACKHAWK DOWN]

I Dont Remember What Its Called But There Are These Tie Strings...those Things Cops Use For Temp Handcuffs....u Just Loop It And Pull It Thru The Latch And It Stays Tite Until U Cut It With A Knife:d Very Useful With The Training Gear

[Old man]

They are called tie raps but brianroy6 idea is better.

[Hemi]

I used some sticky scotch tape wrapped around the carbon rods (like how that tubing is) after I lost most of mine. It works fine.