Simulator for blade CP

I am rather new at this helicopter hobby and own a dragonfly 22d and a blade CP. My question is how can I use the simulator that came with the Dfly 22d with the blade CPtransmitter?. The s video chord from the 22d does plug into the transmitter from the CP. Also can alum parts as an upgrade be purchased for either unit. I am a NewB at this hobby but it sure is a lot of fun learning ,and crashing, and fixing. I can't wait to really be able to hover .

Originally Posted by spindoctor

I am rather new at this helicopter hobby and own a dragonfly 22d and a blade CP. My question is how can I use the simulator that came with the Dfly 22d with the blade CPtransmitter?. The s video chord from the 22d does plug into the transmitter from the CP. Also can alum parts as an upgrade be purchased for either unit. I am a NewB at this hobby but it sure is a lot of fun learning ,and crashing, and fixing. I can't wait to really be able to hover .

The thrill of flying is greater then the sound of crashing!

[dct]

Use RealFlight G2 make some changes to settings to be more real.
One change is called time multiplier from 100 change it to 150.
Next go to weather and put in some wind.. Like 5 mph. or so next very the wind direction like 10* next slide the gust bar one notch to the right.
There are more adjustments you can make to G 2.
But first you have to make a copy of the helicopter your using in G2. If I were you I would use the Impala 30 with training gear..Do you know how? Just pull up the helicopter your using,,, down near the bottom there should be a button that says copy..... Hit it and then name your copy of helicopter what ever you want,,
After making a copy of helicopter you can make a lot of changes ... I'm not at my computer that has G2 on it right now so this might not be just right. Hit the button that says (( Edit )) Go to (( engine )) page down to (( Attributes )) then go to (( Torque Curve )) change from engine with tuned pipe to one with just muffler..
Now you can make some more changes ... One thing a blade cp doesn't have is a heading hold gyro.
Go to gyro tab at the top of window. Open it,,, then change gyro setting to (( Piezo Gyro)) no heading hold,, I think it's the top one I use... Next go to Fuselage page,,, then go to Fuselage Weight ,,, change weight of helicopter to about 3 1/2 lbs. Don't go any lower then this even tho Blade is only about 11 oz. G2 will not work with less then 3.5 lbs!! Let me know how it works for you.