| Re: Which simulator?
FMS is not very real !!! I have used it and now use Real Flight G-2 .
Real Flight G-2 is much better but still I had to do a lot of setting changes to all helicopter's in G-2,,, to make them closer to real thing... With default setting on all helicopter's in G-2 they are not even close to the real thing!!!
(( I fly a Honey Bee Cp2 and they are very lite ))
Fms is only good for teaching you what stick's do what!!! And that's it...
One of the setting in real flight that need changing is ( time multiplier ) you need to speed it up from 100 to 150 * that will make reaction time feel more real to flying RC helicopter's.
Also go into ( weather ) to change wind setting from none to say 5 mph. wind and change direction of wind to + or - 10 * then change gust setting bar from smooth to one click to the right...There are more adjustments you can make to G 2.
But first you have to make a copy of the helicopter your using in G2. If I were you I would use the Impala 30 with training gear..Do you know how? Just pull up the helicopter your using,,, down near the bottom there should be a button that says copy..... Hit it and then name your copy of helicopter what ever you want,,
After making a copy of helicopter you can make a lot of changes ... I'm not at my computer that has G2 on it right now so this might not be just right. Hit the button that says (( Edit )) Go to (( engine )) page down to (( Atitributes )) then go to (( Torque Curve )) change from engine with tuned pipe to one with just muffler..
Now you can make some more changes ... One thing a blade cp doesn't have is a heading hold gyro.
Go to gyro tab at the top of window. Open it,,, then change gyro setting to (( Piezo Gyro)) no heading hold,, I think it's the top one I use... Next go to Fuselage page,,, then go to Fuselage Weight ,,, change weight of helicopter to about 3 1/2 lbs. Don't go any lower then this even tho Blade is only about 11 oz. G2 will not work with less then 3.5 lbs!! Let me know how it works for you.  |