| Re: Need Advice
Ok here it is the T-REX 600CF Kit+600L+75G ESC+3A BEC KX016002A
Features:
1.Electric Power System
2.Carbon Fiber Frame
3.Pre-Painted Fiberglass Canopy
4.Carbon Fiber Tail Blades
5.Triple-Bearing Block Main Shaft Support
6.Fully Driven Tail Auto Rotation System
7.Tail Rotor Drive Belt System
8.Push-Pull Control Linkage
9.Rear Tail Servo Mount
10.10mm Hollow Main Shaft, 8mm Spindle
Specifications:
●Length:1200mm(47.25 in)
●Height:388/405mm(15.25 in/16 in)
●Main Blade Length:600mm
●Main Rotor Diameter:1350mm(53.15 in)
●Tail Rotor:240mm(9.45 in)
●Motor Drive Gear:10T(11T optional)
●Main Drive Gear:170T
●Autorotation Tail Drive Gear:180T
●Tail Drive Gear:40T
●Drive Gear Ratio:1:17.0:4.5/1:15.45:4.5
●Weight(w/o main blade):1340g
●Flying Weight:Approx 3000g(6.6 lbs)
Accessories (Extra of course):
●T-REX 600(CF) Kits SetX1 set(w/o main blade)
●Fiberglass CanopyX1
●StickerX1
●Standard Landing SkidX1
●3D Landing SkidX1
●RCM-BL75G 75A Brushless ESC(Govener Mode)X1
●600L Brushless motorX1
●REC-B3X External BECX1
●5.1V Step-Down Voltage RegulatorX1
●Li-Polymer 7.4V 1100mAh 9C For BECX1
No controller as well but I think that is normal when you get into the bigger stuff.
It lists on the web site here for $620.99 US.
In Taiwan you can probably, for sure, get it cheaper. Not exactly sure how much cheaper though. You can’t really find out until you actually buy one. They won’t engage in the name calling, spitting, pushing, etc., price negotiation unless you are laying some money down.
Nice looking Heli…  |